Mohair Velvet and Silk Velvet buyers consider this: You have just invested a considerable amount of money in a high quality silk velvet or mohair velvet. Are you really considering upholstering with it yourself. Use an experienced upholsterer who, to be brutally honest, should not need the instructions that follow.
Some velvets are woven with a nap others are not. It is not a problem either way. If there is a nap you need to know which way it goes as that affects the process of upholstering. When you run your hand down the mohair velvet or silk velvet the smoothed direction indicates the direction of the nap. Remember this, it is important.
I’m assuming that you have already checked that the fabric is not damaged and that each piece is from the same dye lot.
The nap should be upholstered downwards for:
- the back;
- the seat; and
- side surfaces.
The nap should be upholstered from the outside inwards for:
- arm rests.
How do you flip your cushions? Top to bottom or left to right?
Most people flip from top to bottom. It is therefore standard upholstering practice to upholster the front and the back the opposite way. IE when they are flipped over the nap is the same.
You should use a layer of wadding between the foam and the fabric. The wadding can be either cotton or synthetic it does not really matter but check with any fire rating requirements. Again check that you are using the right kind of foam but HR foam or cold foam are both fine.
However if the pile is vertical then we advise the additional use of a cotton slip-cover.
Going back to the foam for a minute we advise that you use white wadding. In certain circumstances it is possible that grey wadding will ‘bleed’ causing marks on your beautiful Mohair Velvet. For example this may be caused from moisture used in the cleaning process.
Always use wadding on the arm rests as a protective layer to help eliminate ‘sharp’ edges. Using wadding on arm rests will thus reduce wear and tear considerably.
For the piping never use synthetic piping cord, always use cotton piping cord. As with the arm rests this will reduce wear and tear by eliminating the ‘sharper edges’.
Again to reduce wear and tear also use the length of the fabric to make the piping. this will look better as well.
Happy Upholstering
BS7176 BS5852 Crib 5
8 January, 2010
Velvet
Posted by Verity du Sautoy under Contract Fabric, Domestic Fabric, Product Comments, Upholstery, Upholstery Fabric | Tags: contract fabrics, linen velvet, mohair velvet, mohair velvets, silk velvet, silk velvets, textured upholstery fabric, upholstery fabric, upholstry fabric, velvet, velvets |Leave a Comment
Velvets have become increasingly popular over the last 5 years. Both residential and contract usage of velvets have increased tremendously. Having been produced for hundreds of years velvets never seem to have lost the attention of discerning designers.
Interior Designers are often interested in the properties and manufacture of velvet – the two being necessarily related. The depth of the pile, the durability of the finish, the ease of maintaining the beautiful finish.
Velvet is made in one of two ways – cut or uncut:
1. Cut pile
a. Here the loom is configured to (more…)